In the shop painted the back side of some cabinet doors and drawer faces, they are looking super nice. Next up the fronts and then onto hanging doors and finishing up this kitchen in Prestancia, Sarasota. Most are Alabaster from Sherwin Williams but the darker ones are for the island and bar area and they are Accessible Beige, another Sherwin color.

I was using my 2 quart pressure cup with Bin Shellac, just refilled it and thought i had tightened it.. Needles to say I did not and the bottom dropped and I got soaked with Bin.. Time for a shower!

I bought this $60 spray gun from Amazon to see how the gun atomizes the paint compared to my Graco PC Contractor gun. Spraying through my Titan ED655 and using a Graco tip guard and 308 FFLP tip, I am pleasantly surprised how good this sprays. Spraying at about 1650 psi like I do with my Graco gun and it atomizes perfectly, the pattern is nice with no tails or missing areas and It feels very comfortable in my hand. This gun is worth a look if you need something and do not

Spraying two coats of Sherwin Williams Emerald Urethane 7008 alabaster. Using my Titan ED 655 paired with a Graco Contractor PC gun and a 308 FFLP tip @ 1600 psi +/- for a beautiful finish, this sprayer, gun and tip combo works perfect for cabinet painting. I have been spraying EU on cabinets for years and never a single paint failure, this paint is super tough and stands up to normal everyday kitchen use.

I ordered this $60.00 spray gun from Amazon to try it out, I was curious how would compare to my Graco Contractor PC gun, so today just unboxing and cleaning it up so I can spray with it. Handling the gun is seems just like a Titan spray gun in every way, about the same weight, mostly metal, has a comfortable feel in the hand. I do like the short trigger although not a huge deal and I will use the Graco tip guard with the FFPL tips I usually use.

Today I am filling holes on these cabinet drawer fronts, they are going with a large hole pattern just on the drawers. First I drill the hole slightly large then it is not with a drill bit fit to the size of the dowel I use. Quick note, drilling from the front side prevents any splintering which can happen when the drill pokes through the other side unless you have something backing it. I roll the dowel in a little wood glue and tape it into the hole from the backside, I

Primed these cabinet frames yesterday and today spraying two coats of Sherwin Williams Emerald Urethane. The Island and Lower cabinet at the bar area will be sw 7036 accessible beige and the rest of the kitchen cabinets sw 7008 alabaster. TPC Prestancia, Sarasota Florida

Just finished taping these frames and getting them ready for primer which is up next. Already we have cleaned, sanded, cleaned, and protected all areas that are not getting painted. Right as I primer I will put up the temporary wall up outside the kitchen door and a few filters around the kitchen to clean up the air. TPC Prestancia, Sarasota Florida

Just dropped of this table, which was the finishing touch and last element in this beautiful kitchen we refinished in Waterlefe River Club, Bradenton. We painted these beautiful cabinets SW Natural Linen and the island went SW Porpoise 7047, and we topped that off with the table in SW seal salt. Silky smooth feel with lasting durability, the perfect combination for the perfect look. Call, text 941-266-0900 or click my website link for lots more information and a free consul